The following list includes relevant publications of Dr. Matt Aldissi from a total of 120 papers, books and book chapters.

1. A. Barbot, B. Lucas, C. Di Bin, B. Ratier, and M. Aldissi, “Optimized Inverted Polymer Solar Cells Incorporating Cs₂CO₃-Doped C60 as Electron Transport Layer”, Applied Physics Letters, (2013) 102(19), 193305, http://dx.doi.org/10.1063/1.4807388

2. A. El Hajj, B. Lucas, A. Barbot, R. Antony, B. Ratier and M. Aldissi, “Organic Solar Cells Using a ZnO/Cu/ZnO Anode Deposited by Ion Beam Sputtering at Room Temperature for Flexible Devices”, Journal of Nanoscience and Nanotechnology (2013) 13, 1-6, doi:10.1166/jnn.2013.7502.

3. A. Barbot, C. Di Bin, B. Lucas, B. Ratier, M. Aldissi, “N-type doping and thermoelectric properties of co-sublimed cesium-carbonate-doped fullerene”, J Mater Sci (2013) 48, 2785-2789, DOI 10.1007/s10853-012-6824-1.

4. B. Lucas, A. El Amrani, A. Moliton, A. Skaiky, A. El Hajj, M. Aldissi, “Charge transport properties in pentacene films: Evaluation of carrier mobility by different techniques”, Solid State Electron (2012), doi:10.1016/j.sse.2011.12.011.

5. A. El Hajj, B. Lucas, M. Chakaroun, R. Anton, B. Ratier, M. Aldissi, “Optimization of ZnO/Ag/ZnO multilayer electrodes obtained by Ion Beam Sputtering for optoelectronic devices”, Thin Solid Films (2011), doi:10.1016/j.tsf.2011.10.193

6. M. Chakaroun, B. Lucas, B. Ratier, M. Aldissi, “ITO/Au/ITO multilayer electrodes for CuPc/C60 solar cells”, Energy Procedia (2012).

7. B. Ratier, J-M. Nunzi, M. Aldissi, T. Kraft, E. Buncel, “Organic solar cell materials and active layer designs-improvements with carbon nanotubes: a review”, Polymer International 61(3), March (2012) pp. 342-354, online: 5 JAN 2012 | DOI: 10.1002/pi.3233.

8. A. El Amrani, B. Lucas, F. Hijazi, A. Skaiky, T. Trigaud, and M. Aldissi, “Transparent pentacene-based photoconductor: high photoconductivity effect”, Eur. Phys. J. Appl. Phys. 51, 33207 (2010).

9.   M. Chakaroun, A. El Amrani, B. Lucas, B. Ratier, M. Aldissi, “Organic optoelectronic devices-flexibility versus performance”, Eur. Phys. J. Appl. Phys., 51, 33206 (2010).

10. R. Radbeh, E. Parbaile, M. Chakaroun, B. Ratier, M. Aldissi, A. Moliton, “Enhanced efficiency of polymeric solar cells via alignment of carbon nanotubes“, Polymer International, 59 (11), Special Issue: Sp. Iss. SI, 1514-1519 , Nov. (2010).

11. A. El Amrani, F. Hijazi, B. Lucas, J. Bouclé and M. Aldissi, “Electronic transport and optical properties of thin oxide films“, Thin Solid Films 518 (16), (2010) 4582-4585.

12. M. Chakaroun, B. Lucas, B. Ratier, C. Defranoux, J.P. Piel, M. Aldissi, “High quality transparent conductive electrodes in organic photovoltaic devices”, Thin Solid Films, 518 (2009) 1250-1253.

13. R.A. Janes, M. Aldissi and R.B. Kaner, Controlling surface area of titanium nitride using metathesis reactions, Chem. Mater. 15, 4431 (2003).

14. M. Aldissi, “Multi-layered polymer electrolytes towards interfacial stability in lithium ion batteries”, J. Power Sources, 94 (2001) 219.

15. M. Aldissi, “Novel Heterojunctions based on Conducting Polymers”, Proceedings of the Soc. Of Plastics Engineers, ANTEC, May 1999.

16. M. Aldissi, B. Schmitz, E. Lazaro, M. Bhamidipati and B. Dixon, “Conducting Polymers in Ultracapcitor Applications”, Proceedings of the Soc. Of Plastics Engineers, ANTEC, May 1998.

17. M. Aldissi, E. Lazaro, M. Bhamidipati, B. Dixon, “Solid-State Ultracapacitors for Electric Vehicles and Consumer Electronics”, Annual Automotive Technology Development Customers’ Coordination Meeting, Oct. 27-30, 1997, Vol. 3, p. 227.

18. M. Aldissi, editor, “Intrinsically Conducting Polymers: An Emerging Technology” Kluwer Academic Publishers, The Netherlands (1993).

19. M. Aldissi, R.H. Baughman, J.M. Ginder, H.H. Kuhn, H. Neidlinger and S. Ventura, “Conducting Polymers in Energy and Transportation Technologies”, Critical Review in Surface Chemistry 3(1), 13-28, (1993).

20. M. Aldissi, “Interface-Performance Relationship in Redox-Type Applications of Electroactive Polymers“, Extended Abstracts, Electrochem. Soc. Meeting, Honolulu, Hawaii, May 16-21, 1993.

21. M. Aldissi, “Electrochemistry of Coatings of Conducting Polymer Colloids” in “Electrochemistry in Microheterogeneous Fluids”, R. Mackay and J. Texter Ed., VCH Publishers, 1992, p.217.

22. M. Aldissi, “Processing, Fabrication, Applications, and Limitations of Inherently Conducting Polymers”, Los Alamos Report # LA-10686-MS, November, (1987).

23. M. Aldissi and A.M. Nyitray, “Electrochemical Synthesis and Characterization of New Conducting Polyheterocycles“, in ACS Books Series “Polymers for High Technology Electronics and Photonics“, M. Bowden and S. Turner ed., p.559 (1987).

24. M. Aldissi, “Physical Properties, Electrochemistry, and Environmental Stability of Polyacetylene Copolymers and Composites“, Synth. Met. 15 (2-3), 141 (1986).

25. M. Aldissi, and A. R. Bishop, “Electrochemistry of Polyacetylene Block Copolymers“, Synth. Met. 14 (1-2), 13 (1986).

26. A.G. MacDiarmid, M. Aldissi, R. B. Kaner, M. Maxfield, and R. J. Mammone, “The Electrochemistry of Polyacetylene: Application in High Power Density Rechargeable Batteries”, The Electrochem. Soc. Extended Abstracts 83 (1), 842 (1983).

27. A.G. MacDiarmid, M. Aldissi, R. B. Kaner, M. Maxfield, and R. J. Mammone, “The Aqueous and Non-Aqueous Electrochemistry of Polyacetylene: Application in High Power Density Rechargeable Batteries”, A. C. S., Org. Coat. Appl. Polymer Sci. Proc. 48, 531 (1983).

28. M. Cadene, M. Rolland M. Aldissi, and M. Abadie, “Cadmium Sulfide – Polyacetylene Photovoltaic Heterojunctions”, J. Comm. Eur. Communities, No. Eur., 8042, 848 (1982), and Photovoltaic Solar Energy Conference Proc.